To help with funding our chump team and some other projects, I am putting my M Coupe track car up for sale. I bought it in May as a weekend/HPDE car which I used at AMP for a few track days and occasionally to work and Caffeine and Octane. It is a great car and I have put many really nice parts on it to make sure it runs right and performs well at the track. The first person who comes and sees/drives it will buy it as it is an awesome car. It does carry a rebuilt title and when I inquired about the accident, it was hit in the front passenger side which required the bumper, fender, bumper and radiator support to be replaced. I understand that there was not any frame damage and it tracks absolutely straight even with the camber plates.

Asking $12000

Thanks for looking PM me for details

Here are the details:

1999 M Coupe
WBSCM9338XLC60307
Rebuilt Georgia Title in hand
136k
Originally Black/Black, but I had it professionally painted Laguna Seca Blue (Incredible quality job with a full clear coat from a friend who rebuilds classic Mustangs full time in a full restoration shop)
No rust (including before paint job)
No warning lights (although they all work to which I'll post a video)
Everything works as it should (except for the radio since I took out the subwoofer which included the AMP, but I am sure since it has an aftermarket radio, there should be an easy work around)
17X9.5/10.5 Apex Arc 8's with BF Goodrich G-Force 235/265 tires fronts have camber wear, but were recently flipped and should have >50% tread on the inside and rears have no camber wear and have >65%
Recent suspension overhaul with H&R Clubsport Coilovers, new mounts gaskets, turner camber plates, lots of other parts and a fresh alignment by Butler Tire (Best tire/wheel shop in Georgia)
Partial interior strip: Kept the dash, door panels, airbags, center console, radio equipment, A/C, Heater and their controls (both work great)
Recently installed two alcantara NRG fixed one-piece seats mounted on sparco floor and side mounts (have a set of sliders for the driver seat, but did not install them as the seating position should work for most people).
Supports welded in for the trunk floor (mechanic said the floor was fine, but wanted to be better safe than sorry)
Slight ignition tumbler issue, but works fine